Seagull Models 337 Skymaster Specifications download pdf (Page 24)

CESSNA 337 SKYMASTER Instruction Manual.

4) Apply 2-3 drops of thin C/A to each of the

mounting holes. Allow the C/A to cure without

using accelerator.

6) Secure the servo to the aileron hatch using

Phillips screwdriver and the screws provided

with the servo.

5) Use dental floss to secure the connection

so they cannot become unplugged.

7) Apply 1-2 drops of thin C/A to each of the

mounting tabs. Allow the C/A to cure without

using accelerator.

8) A string has been provided in the wing to

pull the aileron lead through to the wing root.

Remove the string from the wing at the servo

location and use the tape to attach it to the

servo extension lead. Pull the lead through the

wing and remove the string.

3) Use drill bit in a pin vise to drill the mouting

holes in the blocks.

String.

Small weight.

1) Using a small weight (Weighted fuel pick-up

works well) and string, feed the string through

the wing as indicated.

2) Place the servo between the mounting

blocks and space it from the hatch. Use a pencil

to mark the mounting hole locations on the

blocks.

Servos.

Small weight.

Thread.

Because the size of servos differ, you

may need to adjust the size of the precut open-

ing in the mount. The notch in the sides of

the mount allow the servo lead to pass through.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

No comments

Seagull Models 337 Skymaster Specifications Page 24