Seagull Models 337 Skymaster Specifications download pdf (Page 14)

CESSNA 337 SKYMASTER Instruction Manual.

2) Use a pin drill and 2mm drill bit to drill a

small indentation in the mount for the engine

mounting screw.

105mm.

MOUNTING THE ENGINE AFTER.

 1) Position the engine with the drive washer

(110mm) forward of the firewall as shown.

2mm

5) Slide the pushrod tube in the firewall and

guide it through the fuel tank mount. Use

medium C/A to glue the tube to the firewall

and the fuel tank mount.

6) Connect the Z-bend in the 450mm throttle

pushrod to the outer hole of the carburetor

arm.

Pushrod tube hole.

3) Use a drill to drill the four holes in the engine

mount rails.

4) On the fire wall has the location for the

throttle pusshrod tube (pre-drill).

2mm diameter.

Machine screw M3x25mm.

7) Slide the throttle pushrod wire into the

tube. Position the engine between the

mounts. Use four 3x15mm machine screws to

secure the engine to the mount as shown.

Pushrod wire.

Screw.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

No comments

Seagull Models 337 Skymaster Specifications Page 14