Seagull Models 337 Skymaster Specifications download pdf (Page 13)

www.seagullmodels.com

Linkage.

5) Slide the pushrod tube in the firewall and

guide it through the fuel tank mount. Use

medium C/A to glue the tube to the firewall

and the fuel tank mount.

6) Connect the Z-bend in the 450mm throttle

pushrod to the outer hole of the carburetor

arm.

Pushrod tube hole.

3) Use a drill to drill the four holes in the engine

mount rails.

4) On the fire wall has the location for the

throttle pusshrod tube (pre-drill).

M3x15mm.

2mm

Pushrod wire.

Machine screw M3x15mm.

Trim and cut.

7) Slide the throttle pushrod wire into the

tube. Position the engine between the

mounts. Use four 3x15mm machine screws to

secure the engine to the mount as shown.

9) Move the throttle stick to the closed position

and move the carburetor to closed. Use a 2.5mm

hex wrench to tighten the screw that secures

the throttle pushrod wire. Make sure to use

threadlock on the screw so it does not vibrate

loose.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

No comments

Seagull Models 337 Skymaster Specifications Page 13