Seagull Models GROB TUTOR G115 Specifications download pdf (Page 7)

7

www.seagullmodels.com

INSTALL THE AILERONS CONTROL

HORN.

2 sets.

3x35mm.

Masking tape.

Sealing iron.

1) Locate the hardware necessary to install

the control horns for the ailerons.

2) Position the control horn on the bottom of

the aileron. You will see pre-drill hole 3mm for

the horn mounting screw on the aileron.

3) Place epoxy into hole. This will harden the

threads and prevent the crews from pulling

loose.

4) Thread a control horn end with aluminum

washer, lock nut until the top edge of the end is

18mm from the vase of the horn as shown.

Aileron control horn .

ALUMINUM WASHER.

ALUMINUM WASHER.

CONTROL HORN

M3 SCREW.

14mm.

Epoxy.

Wing

Wing

Epoxy.

M3 LOCK NUT.

Install the flap control horn using the same

method as same as the aileron control horns.

INSTALL FLAP CONTROL HORN.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comments to this Manuals

No comments