Seagull Models GROB TUTOR G115 Specifications download pdf (Page 6)

GROB TUTOR G115 Instruction Manual.

6

3) Once the epoxy cures and use a covering

iron to seal the covering on the wing and over

the wing tip.

WING TIP ASSEMBLY.

Remove covering.

Fill epoxy.

Covering.

Wing tip.

1) Attach the plastic wing tip to the wing. Use a

hobby knife to remove the covering at the wing

end.

2) Apply the epoxy to the surface of both wing

tip and wing end. The plastic wing tip is held in

position and install it to the wing end. Please

see pictures shown.

Work the aileron up and down several

times to “work in” the hinges and

check for proper movement.

Note:

HINGING THE ELEVATORS.

Glue the elevator hinges in place using the

same techniques used to hinge the ailerons.

HINGING THE RUDDER.

Glue the rudder hinges in place using the

same techniques used to hinge the ailerons.

Hinge.

 8) After both ailerons are securely hinged,

firmly grasp the wing panel and aileron to

make sure the hinges are securely glued and

cannot be pulled out. Do this by carefully

applying medium pressure, trying to separate

the aileron from the wing panel. Use caution

not to crush the wing structure.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Comments to this Manuals

No comments