Seagull Models Ultimate Specifications download pdf (Page 24)

ULTIMATE. Instruction Manual.

!1) It is critical that your airplane be bal-

anced correctly. Improper balance will cause

your plane to lose control and crash. The cen-

ter of gravity is locate

12.5-15cm back from

the leading edge of the wing, measured at

center rib of upper wing.

BALANCING.

! 1) Plug the six servo leads and the switch

lead into the receiver. Plug the battery pack

lead into the switch also.

! 2) Wrap the receiver and battery pack in

the protective foam rubber to protect them

from vibration.

3) Route the antenna in the antenna tube

inside the fuselage and secure it to the bot-

tom of fuselage using a plastic tape.

INSTALLING THE RECEIVER.

!2) If the nose of the plane falls, the plane

is nose heavy. To correct this first move the

battery pack further back in the fuselage. If

this is not possible or does not correct it, stick

small amounts of lead weight on the fuselage

sides under the horizontal stabilizer. If the tail

of the plane falls, the plane is tail heavy. To

correct this, move the battery and receiver for-

ward orif this is not possible, stick weight onto

the firewall or use a brass heavy hub spinner

A=A’ B=B’ C=C’ D=D’ E=E’ F=F’ G=G’

B’

C’

D’

AA’

INSTALLING THE CANOPY HATCH.

1 2 ... 19 20 21 22 23 24 25 26

No comments

Seagull Models Ultimate Specifications Page 24